DIY Gallows Tool

Moderators: William Anderson, letumgo

Post Reply
ScottP
Posts: 426
Joined: Mon Dec 29, 2014 12:02 am

DIY Gallows Tool

Post by ScottP » Sun May 31, 2015 5:47 pm

More of a dry fly thing, I know, but there are some wet applications where this be useful (I'm working on a Quigley wet fly, but it's still in the test stage).

Since I started tying Hacklestackers, I tried a bunch of different ways to hold the post loop while wrapping the hackle (never did get the hang of the mono loop on the finger like Mr. Quigley tied it). DIdn't feel like buying a gallows so I tried everything from bent coat-hangers to rubber bands on the Ott light that hangs over my vise. Rooting through the bins at Home Depot for another project, I found some nylon spacers that fit the vise shaft and figured they'd work as the base; just needed the right material for the hook part. Coat hangers are a bit thick and really don't have that much spring to them, same with all the spooled wire I could find. Thought about stuff like 304 spring steel wire, music wire, etc, then remembered the wire on those cheapy marker flags might work (grabbed one from the neighbor's yard - I'm sure they won't have any trouble finding those buried cables they're going to start digging around). The stuff is perfect - flexible, doesn't seem to have much memory, provides the right amount of tension, and is long enough that when it's bent and attached to the post loop, there's plenty of room to wrap the hackle without banging into it.

base - nylon spacer 3/8" I.D. x 1" x 3/8"
arm - 1/6" wire (from marker flag)
glue - 5 min epoxy

spacer; drill 1/16" hole

Image

Image


flag (pull the flag off and clean up the wire with a little steel wool)

Image


bend end of the wire into a hook

Image


epoxy other end into the spacer

Image


slide it on the vise shaft and Bob's your uncle

Image


Image

Image

Image

plenty of clearance for wrapping hackle

Image


finished product

Image


a better shot of the setup; the wire's about 20" long so it describes a decent-sized arc.

Image



total cost - $.50 for the spacer


Regards,
Scott
User avatar
letumgo
Site Admin
Posts: 13346
Joined: Sat Feb 21, 2009 7:55 pm
Location: Buffalo, New York
Contact:

Re: DIY Gallows Tool

Post by letumgo » Sun May 31, 2015 6:32 pm

I love these little DIY projects. Very resourceful and funtional gallows. Great tutorial Scott. Thank you.
Ray (letumgo)----<°))))))><
http://www.flytyingforum.com/index.php? ... er=letumgo

"The world is perfect. Appreciate the details." - Dean
User avatar
tie2fish
Posts: 5072
Joined: Sun Feb 22, 2009 9:11 am
Location: Harford County, MD

Re: DIY Gallows Tool

Post by tie2fish » Mon Jun 01, 2015 8:34 am

Very clever and well explained, Scott.
Some of the same morons who throw their trash around in National parks also vote. That alone would explain the state of American politics. ~ John Gierach, "Still Life with Brook Trout"
User avatar
William Anderson
Site Admin
Posts: 4569
Joined: Mon Feb 23, 2009 3:14 pm
Location: Ashburn, VA 20148
Contact:

Re: DIY Gallows Tool

Post by William Anderson » Mon Jun 01, 2015 8:57 am

Scott, that's a nice rig with plenty of room to work without it being in the way. Beautiful hackle stacker technique.

w
"A man should not try to eliminate his complexes, but rather come into accord with them. They are ultimately what directs his conduct in the world." Sigmund Freud.
www.WilliamsFavorite.com
User avatar
hankaye
Posts: 6582
Joined: Tue Jun 08, 2010 4:59 pm
Location: Arrey, N.M. aka 32°52'37.63"N, 107°18'54.18"W

Re: DIY Gallows Tool

Post by hankaye » Mon Jun 01, 2015 9:50 am

ScottP. Howdy;

With the imagination that you've displayed with your tying it's not surprising
that you were able to concoct the devise that you so aptly created. Good stuff!
I'm curious as to how you ended up with your 'stacked' hackle only covering
about 30°of the top. Trim it in the barber shop or is it a special wrapping technique?

hank
Striving for a less complicated life since 1949...
"Every day I beat my own previous record for number
of consecutive days I've stayed alive." George Carlin
ScottP
Posts: 426
Joined: Mon Dec 29, 2014 12:02 am

Re: DIY Gallows Tool

Post by ScottP » Mon Jun 01, 2015 10:59 am

Hank,

One of the cool things about Hacklestackers is that Bob Quigley came up with an ingenious way to double the hackle density without having to trim it out of the bottom. Here's a few pics of the hackling sequence for a Quigley Film Critic green drake I tied up:

tie in loop of Uni-stretch, wrap to wing butt

Image


tie in hackle

Image


attach loop to gallows

Image


wrap hackle up & down post (length of thorax); tie off at base of post/trim

Image

Image


after dubbing the head, moisten fingers, sweep hackle fibers back

Image


pull hackle forward over thorax, tie off at base of wing (trim off tag end of post)

Image


pull wing up and back, set angle with thread wraps

Image


half hitch x 2, SHHAN; trim wing (a bit longer than shank)

Image

Image

Image


Regards,
Scott
User avatar
letumgo
Site Admin
Posts: 13346
Joined: Sat Feb 21, 2009 7:55 pm
Location: Buffalo, New York
Contact:

Re: DIY Gallows Tool

Post by letumgo » Mon Jun 01, 2015 11:47 am

Incredible! What a terrific emerger pattern. Kudos Scott, on another valuable contribution.
Ray (letumgo)----<°))))))><
http://www.flytyingforum.com/index.php? ... er=letumgo

"The world is perfect. Appreciate the details." - Dean
User avatar
hankaye
Posts: 6582
Joined: Tue Jun 08, 2010 4:59 pm
Location: Arrey, N.M. aka 32°52'37.63"N, 107°18'54.18"W

Re: DIY Gallows Tool

Post by hankaye » Mon Jun 01, 2015 5:07 pm

ScottP. Howdy;

Dang! Thanks for the stop-action (so-to-speak), of how that goes together.
Still far beyond my skill-sets, but Something that, even for me, is easy to follow
and understand at the same time. Amazzzing! 8-)
Thank you very much for taking the time to go into such detail, you left nothing
to be either confusing or misunderstood. :D

hank
Striving for a less complicated life since 1949...
"Every day I beat my own previous record for number
of consecutive days I've stayed alive." George Carlin
Post Reply