Hackle Pliers

Moderators: William Anderson, letumgo

newriverspey
Posts: 355
Joined: Tue Sep 15, 2009 6:37 am
Location: Blacksburg, Virginia

Hackle Pliers

Post by newriverspey » Wed Nov 24, 2021 1:31 pm

Hi all,

I am looking for a decent pair of hackle pliers. Any advice anyone could give me regarding your preferred hackle pliers would be much appreciated.

Thanks,
Otto
User avatar
Ron Eagle Elk
Posts: 2748
Joined: Sun Feb 22, 2009 12:33 am
Location: Carmel, Maine

Re: Hackle Pliers

Post by Ron Eagle Elk » Thu Nov 25, 2021 8:20 am

Morning, Otto, and Happy Thanksgiving. Okay, hackle pliers. I've got maybe a dozen different styles and sizes at my tying bench. The ones I always reach for are the C&F Designs pliers. In fact, I have two, just in case I lose one. They can be found cheaper, but not by much than this link. https://www.flyfishfood.com/products/c- ... kle-pliers

My wife prefers these, but I've always had to take the emery paper to the sharp edges. https://www.amazon.com/Tyflyz-Toolz-Hac ... 79&sr=8-18
"A man may smile and bid you hale yet curse you to the devil, but when a good dog wags his tail he is always on the level"
User avatar
hankaye
Posts: 6582
Joined: Tue Jun 08, 2010 4:59 pm
Location: Arrey, N.M. aka 32°52'37.63"N, 107°18'54.18"W

Re: Hackle Pliers

Post by hankaye » Thu Nov 25, 2021 11:11 am

Otto, Howdy;

Have you tried looking at the maker of your Vise?
He's got one that I've used and just a wee bit on
the hefty side, but workable. I tried the "Third Hand"
version. Here, the link does a better job then I can.
http://www.frankenfly.com/new-tools-from-jvice/
HAPPY Thanksgiving.

hank
Striving for a less complicated life since 1949...
"Every day I beat my own previous record for number
of consecutive days I've stayed alive." George Carlin
newriverspey
Posts: 355
Joined: Tue Sep 15, 2009 6:37 am
Location: Blacksburg, Virginia

Re: Hackle Pliers

Post by newriverspey » Thu Nov 25, 2021 11:55 am

Hank, thanks for the suggestion and I do have a pair of those hackle pliers that work great for bigger flies but a bit heavy for small soft hackles. Ron, I like those and will most likely get a pair and someone else suggested them to me as well. Thank you both for your suggestions.
User avatar
Roadkill
Posts: 2480
Joined: Sat Feb 28, 2009 11:09 am
Location: Oregon

Re: Hackle Pliers

Post by Roadkill » Thu Nov 25, 2021 12:48 pm

You can tame the jaws of some hackle pliers with heat shrink tubing or plastic tool dip.
wsbailey
Posts: 990
Joined: Fri Feb 27, 2009 6:30 pm
Location: Fort Wayne Indiana

Re: Hackle Pliers

Post by wsbailey » Thu Nov 25, 2021 1:13 pm

bearbutt
Posts: 152
Joined: Thu Nov 01, 2018 8:15 pm

Re: Hackle Pliers

Post by bearbutt » Thu Nov 25, 2021 3:54 pm

For Hackle, I prefer small arterial clamps, about 2" long:

Image

They have serrated teeth and grip very well. For CDC, I use wire test clips.

Image


bb
bearbutt
Posts: 152
Joined: Thu Nov 01, 2018 8:15 pm

Re: Hackle Pliers

Post by bearbutt » Fri Nov 26, 2021 9:08 am

ForumGhillie wrote: Thu Nov 25, 2021 4:52 pm [
BB, I have never those seen before. Where the heck did you find those?

That's because you've not yet visited me in Chicago--land of FIBs, and other miscreants!

You can find them on eBay--Debakey Bulldog clamps, you want the 2" version--sometimes they are available, sometimes not. Here's something close (2.25"):

https://www.ebay.com/itm/111029082553?h ... SwMalgb-cA

Make sure you are getting Operating Room quality instruments--there's a lot of junk out there. Some fly shops have been selling knockoffs that are useless--don't use the proper stainless steel, and have poor holding power. Good ones will cost $20 or so and up. Worth it--they are light, and I especially like the control I get with the curved jaw version.

bb
User avatar
ronr
Posts: 864
Joined: Fri Feb 12, 2016 12:03 pm
Location: Central Oregon/Texas Transplant

Re: Hackle Pliers

Post by ronr » Fri Nov 26, 2021 10:26 am

One pair of Hackle pliers will never do the job... I use at least four different types depending on the feathers, size, and fly being tied..... Everyone's hands, steadiness, and tying style has a lot to do with which works best for you. Lots of good ones out there. I've found that the lightest, and best fit for my hands work best for tying hackles on smaller flies and the fragile feathers we use.

Newriverspey.. pm me your address and I'll send you a pair of wire test clips...very useful for small feathers...

REE sent a link to two of my fav's too.
newriverspey
Posts: 355
Joined: Tue Sep 15, 2009 6:37 am
Location: Blacksburg, Virginia

Re: Hackle Pliers

Post by newriverspey » Fri Nov 26, 2021 2:18 pm

Ronr,

will Pm you and thanks for the offer.

Otto
Post Reply